Concrete Block Material


For more than 100 years, concrete block has been utilized as a building material. Concrete block is also a regular building material mostly used in home construction in some regions. Generally, concrete blocks are produced with a combination of materials like Portland cement, water and different aggregates like stone or quartz. Chances are high that from their outermost facings or coverings,  you’ve distinguished many concrete block homes that don’t appear made out of concrete block. 

Features of Concrete Block

In the construction industry, a concrete block is attributed to as a concrete masonry unit (CMU). Concrete blocks have two or three cores or voids and can be solid or hollow. The blocks come in a variety of standard shapes. In general, the measurement of concrete blocks: 16 inches long by 8 inches wide by 8 inches high.  Concrete blocks actual widths and heights: quarter-inch less. Concrete blocks are durable, lightweight, and fireproof making them functional home building material.

Advantages of Concrete Block

Concrete blocks are ideal for foundations and basement walls because they’re tough compared to poured concrete when they’re constructed and built properly.  Using concrete blocks, division walls in any home can be put up fast and for additional stability, their cores or voids can be loaded with steel reinforcing rods and concrete. Termites or extreme temperatures in most cases has no effect on a concrete block and depending on construction quality is practically soundproof. Insulation against cold and heat is also provided using concrete blocks and may decrease a home’s use of energy.

Disadvantages of Concrete Block

A concrete block must be built correctly to prevent future foundation buckling while poured concrete can simply be filled into a foundation hole and allowed to harden. Concrete block has a basic industrial look that might not be appealing unless facing like stucco is applied over it. It may sustain water damage on land with a high water table if concrete block foundations and basements were improperly built. In comparison to wood, concrete block is also more expensive as a building material.

You might want to check for more info.

Once inexpensive steel reinforcing rods and wet concrete are placed in the cores, concrete block homes are sturdy. Expect the home to retain its good condition in years to come. Nevertheless, not only because wood is lightweight and abundant, but also because builders can construct such homes fast as homes built of wood are less expensive to construct.






Flaws in Slate Flooring


It can be quite pricey for the commencing cost to buy natural slate flooring tiles especially when buying the type of grade-A quality materials but it will last for years and decades thus replacement can be avoided.

The cost may go beyond because tiles aren’t the only material needed but complementary materials including grout and adhesive must be bought, and the transportation cost when renting heavy equipment for forming tiles. Allocating the cost of a contractor as well as in most cases professional help is necessary upon installation.


To keep a slate tile floor looking alluring, there is a certain amount of maintenance that is needed. The need to use two different substances during the installation, before grouting, and immediately after everything is (1) a quality below surface sealer to block the very small pores in the stone, and (2) a top barrier sealer to produce an invisible layer over the material. These may need to be reapplied periodically yearly or so depending on location and use.

Grout Lines

Since grout is not a solid material as it is made to be malleable in aid to the expansion and contraction pieces of stone do not shatter during extreme temperature.

Sad to say, grout lines are the most susceptible point in the installation, and they are prone to stains, including the growth of mold and mildew. To some extent, regular sealing can reduce the elimination of above-mentioned factors. Without uninstalling the tiles themselves, it is also possible to totally remove and replace grout lines.


Preventing the occurrence of slips and trips, this cleft finish is most often engaged in wet environments where the traction is provided. However,  it can be uncomfortable in gentler environments where bare feet touch the ground. For the honed and brushed finish, this will never be an issue.


Slate tile is poor at keeping them, which can drive for an intensely cold and unbearable floor during winter mornings although it is great material for transmitting heat and cold. In places like bedrooms, bathrooms, and other locations where people often go barefoot, this can be a particular drawback. It can still be offset to some extent by the placing rugs on areas, and or beneath surface heating systems.


It is difficult and the back-breaking installation process considering the weight of slate, which will either eat your budget to pay contractors or solid work daily wages. If not impossible, this also makes it difficult to install this material in high story locations, with a restriction on environmental changes.


The problem of having individual uniqueness is that it is difficult to pre-plan around this stone, since samples and pictures may vary from the actual vein strain available at any given time. You should always dry lay out a slate flooring installation before committing to mortar and grout as it can also lead to design quandaries.




Deciding on Ceiling Color

The ceiling is a part of the room that is mostly unnoticed. Seldom do homeowners be aware that it needs special attention as well. Through the years, painting the ceiling white has been the common norm as it is the best choice and safest. Your home may be missing an opportunity to add excitement and remodeling to a room although white is still the perfect solution, if you never consider anything beyond ordinary, then it’s up to you. You better look up and take a look if your ceiling needs some freshening

Painting the Ceiling in Light Hue or Dark Hue: The fact is, ceilings that are painted lighter than the walls look elevated, while ceiling painted with darker color looks shorter. We are not talking claustrophobic “Lower” here but visually lowered ceilings can recall cozy warmth.

Consider the placement of the lighting plus its strength, its effect on the room during the time you’re mostly using it together with the color of the wall when choosing for ceiling color.

Finish Coats: The usual ceiling paint is flat, but by using an eggshell or satin finish paint will offer just a sign of reflective sheen — an advantage if you’re opting for a darker color. Realize, however, since higher-sheen paints can call attention to surface flaws, then a ceiling must be in near-perfect condition.

Beware of an excess of the color on the ceiling though it can enhance a room’s character. For main living areas, simple is better to keep the ceiling treatment so you don’t grow tired of it.

For a room, painting the ceiling white is often the best choice. Your attention focuses on the walls and furnishings as white overhead tends to recede from view.

A white ceiling also neutralizes intense wall color, the ceiling feels higher even with boldly colored walls that look crisp and precise. A white ceiling opens the space even more if the walls are soft and therefore space-expanding.

For a naturally lighted room, a white ceiling helps promotes the perceived illumination by reflecting whatever light is obtainable.

Painting the ceiling white can have a feeling of monotonous but paint companies manufacture a variety of warm and cool whites, so pick one with the warm or cool undertones.



Choosing The Best Window For Your Home

Choosing the best window for your home is not easy as you think. These days, there are so many types of windows to choose from it’s quite overwhelming to pick the best type that suits your liking and your home.

Consider the different shapes of windows like a square, rectangular, octagonal and even triangular. Some windows slide up, open to the side, and there is tip up like a canopy.

Only a homeowner that understands their options can make a knowledgeable decision to choose the right windows because each of these different types of windows offers something special to a home.

Considering the Cost of the Window

You’ll want to choose with single hung over double hung if you’re trying to select out the most affordable types of windows. Since they are the more common window choice, they are more affordable overall and most people are used to them. Usually, you can save up to 20% of the cost of choosing single hung windows than double hung windows.

Utility Consideration from Choosing a Window

From a utility and maintenance standpoint, double hung windows are the types of windows that are better options. Double hung windows are more adaptable and easier to clean. From inside of your home, you can get to each sash easily and clean both the outside and inside of the window easily. Compared to the single hung windows, you can also tilt the windows to allow a breeze in more effectually.

Different Types of Windows

There are many different types of window like Hopper Windows, Arched Windows, Sliding Windows, Picture Windows, Jalousie Windows, Transom Windows, Storm Windows, Egress Windows, Custom Windows, Hinged or Casement Windows, Round Windows, Garden Windows, Glass Block Windows, Skylight Windows, Bay or Bow Windows, and Specialty Windows and each of these windows has special features and different effects on homes.

The most common among windows are Double Hung or Single Hung. How the different window sections move is one major difference between single hung and double hung windows.

The bottom window panel or lower sash moves up and down and the upper sash remains stationary when we say single hung windows.

When you open the window, the upper sash is covered on the inside. Both upper and lower sash can be lowered and raised a double hung window. Each can be inclined as well.



Step by step guide on DIY Painting a Concrete Floor

If you wanted to save money by paying laborers or house painters fee, why not try to do the works. Painting the floor is an easy activity that you can do by just following the steps listed below:

Make sure the floor is clean. Before starting this project, the concrete floor must be completely dry. The source of the water must be stop or any water drippings must be wiped out before starting the project if your floor shows any signs of water seepage. Due to fumes, some of the materials used for this project needs special masks and other equipment for your protection. Before using any product, please read all labels carefully especially it’s precaution and warning notes. After each coating is applied, make sure that the floor is thoroughly dry. Using a degreasing solution, carefully wash the floor. Until mop is clean, rinse several times. Let it dry for several days.

Sanding and Vacuum. For any old paint or any other rough areas, do the sanding. To eliminate any residue, vacuum entire floor, then wipe with tack cloth.

 Smoothen the cracks and holes. Use mix concrete patch compound, following package directions if the surface of your floor is cracked or rough. Use trowel to push it into any depressions to fill any cracks or holes in the concrete floor with compound. Let it completely dry. You may skip to the next step if your floor surface is already smooth.

Coat with Primer. Apply two coats of primer by using paint roller, letting the floor dry thoroughly between coats. 

Use Epoxy Paint. Use at least two coats of epoxy paint upon application, letting the floor dry completely between coats. Use clean paint roller or paint compressor when using epoxy paint.

 Apply Masonry Sealer. Apply several coats of masonry sealer, by using clean roller or compressor, making sure that the floor is completely dry between coats.

Roofing Styles For Your Home

Your house needs a good roof. It’s an important part of your home. That’s your main protection from the heat of the sun, and of course, the rain.

Regardless of how you are building it, knowing what materials to use is essential. It’s the first thing you take into consideration when you’re in the process of deciding what style of roof is best for your house.

Other factors you need to consider are the surroundings, the climate, and the budget. Keep in mind that this is an investment, and it’s totally worth it. You will be using this in the next few years.

Asphalt Composition Shingles

If you’re looking to be economical, this is the popular choice. Asphalt Shingles is one of the most commonly used style of roof because of its durability. This can also be easily installed, and comes in a number of different colors and styles. You will see a lot of this in the suburbs, and it really goes well with country-style homes.

Slate Roofing

In contrast to the asphalt, this is one of the most costly types of roof. This type is also durable and has a touch of elegance to it. If you are looking for beauty and durability, this should be your pick. Even if this roofing is expensive, it’s worth it because it will cost you very little when it comes to maintenance.

Metal Roofing

In the Philippines, metal roofing is very popular because of its resistance to water, and its life span. If your budget is limited, this is a great choice because of the cost. Maintenance-wise, you won’t have a problem either. The installation, however, requires someone with enough experience.

There are other types of roofing available and the choice is yours to make. You just need to figure out your budget, and what your needs are. From there, you should be able to determine the style of roofing that will work best for you.